Kontron AT890X Full-Size CLI - Manual (Page 218)

Utility Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 5 - 20
Mode Privileged EXEC
5.4.23 show boardinfo routing
This commands shows which interface is configured with Layer 3 functionality. It
shows the currently active setting and the setting which becomes effective after the
next reboot.
Format
show boardinfo routing
Mode Privileged EXEC
5.5 Logging Commands
This section describes the commands you use to configure system logging, and to view
logs and the logging settings.
5.5.1 logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default disabled; critical when enabled
Format
logging buffered
Mode Global Config
5.5.1.1 no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
5.5.2 logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full
capacity. Otherwise when the log file reaches full capacity, logging stops.
Default enabled
Format
logging buffered wrap
Mode Privileged EXEC
5.5.2.1 no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop
when the log file capacity is full.
Format no logging buffered wrap
Mode Privileged EXEC
5.5.3 logging console
This command enables logging to the console. You can specify the <severitylevel>
value as either an integer from 0 to 7 or symbolically through one of the following