Kontron AT890X Full-Size CLI - Manual (Page 237)

AT8901/2/3 Utility Commands
Page 5 - 39 AT8901/2/3 CLI Reference Manual
5.9.18.1 no service dhcp
This command disables the DHCP server.
Format
no service dhcp
Mode Global Config
5.9.19 ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The
addresses are from the automatic address pool.
Default disabled
Format
ip dhcp bootp automatic
Mode Global Config
5.9.19.1 no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The address
are from the automatic address pool.
Format no ip dhcp bootp automatic
Mode Global Config
5.9.20 ip dhcp conflict logging
This command enables conflict logging on DHCP server.
Default enabled
Format
ip dhcp conflict logging
Mode Global Config
5.9.20.1 no ip dhcp conflict logging
This command disables conflict logging on DHCP server.
Format
no ip dhcp conflict logging
Mode Global Config
5.9.21 clear ip dhcp binding
This command deletes an automatic address binding from the DHCP server database.
If “*” is specified, the bindings corresponding to all the addresses are deleted.
<address> is a valid IP address made up of four decimal bytes ranging from 0 to 255.
IP address 0.0.0.0 is invalid.
Default none
Format
clear ip dhcp binding {<address> | *}
Mode Privileged EXEC