Kontron AT890X Full-Size CLI - Manual (Page 132)

Routing Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 3 - 20
3.5.6.1 no ip vrrp priority
This command sets the default priority value for the virtual router configured on a
specified interface.
Format no ip vrrp <vrid> priority
Mode Interface Config
3.5.7 ip vrrp timers advertise
This command sets the frequency, in seconds, that an interface on the specified virtual
router sends a virtual router advertisement.
Default 1
Format
ip vrrp <vrid> timers advertise <1-255>
Mode Interface Config
3.5.7.1 no ip vrrp timers advertise
This command sets the default virtual router advertisement value for an interface.
Format no ip vrrp <vrid> timers advertise
Mode Interface Config
3.5.8 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured
on the FASTPATH switch.
Format
show ip vrrp interface stats <unit/slot/port> <vrid>
Modes Privileged EXEC
User EXEC
Uptime The time that the virtual router has been up, in days, hours, minutes
and seconds.
Protocol Represents the protocol configured on the interface.
State Transitioned to Master Represents the total number of times virtual router
state has changed to MASTER.
Advertisement Received Represents the total number of VRRP advertisements
received by this virtual router.
Advertisement Interval Errors Represents the total number of VRRP advertise-
ments received for which advertisement interval is different than the
configured value for this virtual router.
Authentication Failure Represents the total number of VRRP packets received that
don't pass the authentication check.
IP TTL errors Represents the total number of VRRP packets received by the virtual
router with IP TTL (time to live) not equal to 255.
Zero Priority Packets Received Represents the total number of VRRP packets
received by virtual router with a priority of '0'.