Kontron AT890X Full-Size CLI - Manual (Page 207)

AT8901/2/3 Utility Commands
Page 5 - 9 AT8901/2/3 CLI Reference Manual
Transmit Packet Errors The number of outbound packets that could not be transmit-
ted because of errors.
Address Entries Currently In Use The total number of Forwarding Database
Address Table entries now active on the switch, including learned and
static entries.
VLAN Entries Currently In Use The number of VLAN entries presently occupying
the VLAN table.
Time Since Counters Last Cleared The elapsed time, in days, hours, minutes, and
seconds since the statistics for this switch were last cleared.
5.4.6 show interface ethernet
This command displays detailed statistics for a specific interface or for all CPU traffic
based upon the argument.
Format show interface ethernet {< unit/slot/port > | switchport}
Mode Privileged EXEC
The when you specify a value for
<
unit/slot/port
>
, the command displays the following
information:
Packets Received
Total Packets Received (Octets) - The total number of octets of data
(including those in bad packets) received on the network (excluding
framing bits but including Frame Check Sequence (FCS) octets). This
object can be used as a reasonable estimate of Ethernet utilization. If
greater precision is desired, the etherStatsPkts and etherStatsOctets
objects should be sampled before and after a common interval. The
result of this equation is the value Utilization which is the percent uti-
lization of the Ethernet segment on a scale of 0 to 100 percent.
Packets Received 64 Octets - The total number of packets (including
bad packets) received that were 64 octets in length (excluding framing
bits but including FCS octets).
Packets Received 65-127 Octets - The total number of packets
(including bad packets) received that were between 65 and 127 octets
in length inclusive (excluding framing bits but including FCS octets).
Packets Received 128-255 Octets - The total number of packets
(including bad packets) received that were between 128 and 255 octets
in length inclusive (excluding framing bits but including FCS octets).
Packets Received 256-511 Octets - The total number of packets
(including bad packets) received that were between 256 and 511 octets
in length inclusive (excluding framing bits but including FCS octets).
Packets Received 512-1023 Octets - The total number of packets
(including bad packets) received that were between 512 and 1023
octets in length inclusive (excluding framing bits but including FCS
octets).
Packets Received 1024-1518 Octets - The total number of packets
(including bad packets) received that were between 1024 and 1518