Kontron AT890X Full-Size CLI - Manual (Page 70)

Switching Commands AT8901/2/3
AT8901/2/3 CLI Reference Manual Page 2 - 36
2.9.2 set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface
(Interface Config mode) or all interfaces (Global Config mode). If an interface which
has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality is disabled on that interface. GARP functionality is
subsequently re-enabled if routing is disabled and port-channel (LAG) membership is
removed from an interface that has GARP enabled.
Default disabled
Format
set gmrp interfacemode
Modes Interface Config
Global Config
2.9.2.1 no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or
all interfaces. If an interface which has GARP enabled is enabled for routing or is
enlisted as a member of a port-channel (LAG), GARP functionality is disabled. GARP
functionality is subsequently re-enabled if routing is disabled and port-channel (LAG)
membership is removed from an interface that has GARP enabled.
Format
no set gmrp interfacemode
Modes Interface Config
Global Config
2.9.3 show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information
for one or all interfaces.
Format
show gmrp configuration {<unit/slot/port> | all}
Modes Privileged EXEC
User EXEC
Interface This displays the unit/slot/port of the interface that this row in the table
describes.
Join Timer Specifies the interval between the transmission of GARP PDUs regis-
tering (or re-registering) membership for an attribute. Current
attributes are a VLAN or multicast group. There is an instance of this
timer on a per-port, per-GARP participant basis. Permissible values
are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is
20 centiseconds (0.2 seconds). The finest granularity of specification
is 1 centisecond (0.01 seconds).
Leave Timer Specifies the period of time to wait after receiving an unregister
request for an attribute before deleting the attribute. Current attributes
are a VLAN or multicast group. This may be considered a buffer time
for another station to assert registration for the same attribute in order
to maintain uninterrupted service. There is an instance of this timer on
a per-Port, per-GARP participant basis. Permissible values are 20 to