Kontron AT890X Full-Size CLI - Manual (Page 55)

AT8901/2/3 Switching Commands
Page 2 - 21 AT8901/2/3 CLI Reference Manual
receiving interface are admitted and forwarded to ports that are members of that
VLAN.
Default disabled
Format
vlan port ingressfilter all
Mode Global Config
2.3.11.1 no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled,
frames received with VLAN IDs that do not match the VLAN membership of the
receiving interface are admitted and forwarded to ports that are members of that
VLAN.
Format no vlan port ingressfilter all
Mode Global Config
2.3.12 vlan port pvid all
This command changes the VLAN ID for all interface.
Default 1
Format
vlan port pvid all <1-4094>
Mode Global Config
2.3.12.1 no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
Format no vlan port pvid all
Mode Global Config
2.3.13 vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to
enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is
disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format.
vlan port tagging all <1-4094>
Mode Global Config
2.3.13.1 no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to
disabled. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a
valid VLAN identification number.
Format
no vlan port tagging all
Mode Global Config