2 clear dot1x statistics, 3 clear radius statistics, 4 dot1x defaultlogin – Kontron AT890X Full-Size CLI User Manual

Page 72

Advertising
background image

Switching Commands

AT8901/2/3

AT8901/2/3 CLI Reference Manual

Page 2 - 38

of authentication login methods is three. The possible method values are

local,

radius

and

reject

.

The value of

local

indicates that the user’s locally stored ID and password are used for

authentication. The value of

radius

indicates that the user’s ID and password will be

authenticated using the RADIUS server. The value of

reject

indicates the user is

never authenticated.

To authenticate a user, the first authentication method in the user’s login
(authentication login list) is attempted. FASTPATH software does not utilize multiple
entries in the user’s login. If the first entry returns a timeout, the user authentication
attempt fails.

NOTE: The default login list included with the default configuration can not

be changed.

Format

authentication login

<listname> [<method1> [<method2>

[<method3>]]]

Mode

Global Config

2.10.1.1

no authentication login

This command deletes the specified authentication login list. The attempt to delete fails
if any of the following conditions are true:

The login list name is invalid or does not match an existing authentication login list

The specified authentication login list is assigned to any user or to the non config-
ured user for any component

The login list is the default login list included with the default configuration and
was not created using ‘authentication login’. The default login list cannot be
deleted.

Format

no authentication login <listname>

Mode

Global Config

2.10.2

clear dot1x statistics

This command resets the 802.1x statistics for the specified port or for all ports.

Format

clear dot1x statistics

{<

unit/slot/port

> | all}

Mode

Privileged EXEC

2.10.3

clear radius statistics

This command is used to clear all RADIUS statistics.

Format

clear radius statistics

Mode

Privileged EXEC

2.10.4

dot1x defaultlogin

This command assigns the authentication login list to use for non-configured users for
802.1x port security. This setting is over-ridden by the authentication login list

Advertising