Super Systems 3 Series - Manual (Page 5)

Series 3 Operations Manual
5
Issue Status of this Manual
Issue 5 of this Handbook applies to software versions 2.09 and above for PID controller and 2.29 and above for Valve Position
controllers and includes:
• Remote Setpoint Input Option RCL
• Triac output
It also applies to firmware versions 2.11 and includes new parameters:
Inverted status word
Rate of change alarms
Setpoint retransmission limits
Input filter
Issue 6 includes parameter ‘AT.R2G’
Issue 7 corrects range limits. Change to definition of LOC.T. Correct description of enumerations for parameter IM.
Issue 8 includes the following changes:
A more detailed description of loop tuning.
Updates to Appendix A, Technical Specification.