Card feeding errors, Resolving an unable to feed card error, Card feeding errors -24 – FARGO electronic HDP600-LC CR100 User Manual
Page 124: Resolving an unable to feed card error -24
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-24
Card Feeding Errors
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Resolving an Unable to Feed Card Error
Step Procedure
1
Review the following information.
• Symptom: Cards will not feed at all.
• Printer Error State: Card is not being detected by the Card TOF
Sensor 11 seconds after the initiation of a print job causing the Printer
to produce an error
• LCD Error Display: Unable to Feed Card
• Driver Monitor Error Display: Unable to Feed Card
Advertising