Technical specifications (continued) – FARGO electronic HDP600-LC CR100 User Manual
Page 27
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
2-9
Technical Specifications (continued)
Term Description
Fargo Certified
Supplies
Fargo Card Printer/Encoder require highly specialized media to
function properly.
To maximize printed card quality and durability, Printhead life and
Printer/Encoder reliability, use only Fargo Certified Supplies. Fargo
warranties are void, where not prohibited by law, when non-Fargo
Certified Supplies are used.
HDP Film Options
• Clear, 1,250 prints
• Standard Holographic (only HDP600 and HDP600-LC)
• Custom Holographic, special order (only HDP600 and HDP600-
LC)
HDP Film
Storage
Temperature
77ºF (25ºC) or lower for no longer than 1.5 years.
Humidity
20% to 80% (non-condensing)
Input Hopper
Card Capacity
HDP600 and HDP600-LC:
•
200 cards (.030/.762mm)
HDP600 CR100 and HDP600-LC CR100:
•
100 cards (.030/.762mm)
Interface
• Centronics parallel, IEEE-1284 Compliant or USB 1.1
• Interfacing information for E-card Options
Maximum
Accepted Card
Width
2.125 in. to 2.63 in. (54mm to 67mm)
Maximum
Accepted Card
Length
3.375 in. to 3.88 in. (85.6mm to 98.5mm)