FARGO electronic HDP600-LC CR100 - Manual (Page 152)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-52
Resolving a Transfer Film Sensor Not Calibrated Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Transfer Film Sensors are not calibrated.
• Printer Error State: The Transfer Film Sensors must be calibrated
before the transfer film will align properly.
• LCD Error Display: Transfer Film Sensor Not Calibrated
• Driver Monitor Error Display: Transfer Film Sensor Not Calibrated