FARGO electronic HDP600-LC CR100 - Manual (Page 43)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 2-25
Printer Unit: Reviewing the Card Lamination Module
Danger: The Printer’s Lamination Roller can reach temperatures exceeding 350° F
(175° C). Use extreme caution when operating the Laminator. Never touch the Lamination
Roller unless the Printer has been turned off for at least 20 to 30 minutes.
Select Printer models support the attachment of an optional Card Lamination Module. This
Module can be ordered pre-installed on your Printer from the factory or can be ordered
separately as a field upgradeable Module.
•
HDP600/HDP600-LC and HDP600 CR100/HDP600-LC CR100: These Printers have
the same field upgradeable features. The functionality of the Laminator for the HDP600-
LC and the HDP600-LC CR100 is identical.