FARGO electronic HDP600-LC CR100 - Manual (Page 98)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 3-52
Installing the HDP600 Series Card Lamination Module (continued)
Step Description
8 Insert the Driver disk into the CD drive of your PC. See Installing the HDP600
Printer Driver .
9 Follow the Windows Installation Wizard instructions to install the Driver.
10 When prompted by the Driver, connect the Printer, the Lamination power
supplies and the USB cable.
11 Continue with the Driver installation until prompted to exit by the Driver. (Note:
The Printer will automatically update the Firmware to include the Laminator.)
12 You have completed this procedure.