FARGO electronic HDP600-LC CR100 - Manual (Page 190)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-90
Resolving the Image Placement problems (continued)
Step Procedure
2 Verify if the Image Position option within the Image Transfer tab is set
correctly or incorrectly.
a. Open the Printer Control Panel from the Computer.
• If using Windows 98SE, Me, right click on the HDP600 Card Printer
Icon and select Properties.
• If using Windows 2000/XP, right click on the HDP600 Card Printer
and select Printing Preferences.
b. Click on the Image Transfer tab.
c. Adjust the Vertical and/or Horizontal Image Position settings based on
where the white border is on the card.