FARGO electronic HDP600-LC CR100 - Manual (Page 429)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 16-6
S
safety issues, 1-2, 2-1, 3-1, 6-2, 7-2, 8-2
Safety Standards, 2-5
Saturation, 15-17
Save this Program to Disk, 12-3
Scroll Buttons, 2-15
second K Panel, 7-34
SELECT FUNCTION screen, 11-1
Select Printer button, 12-4, 12-7
Select Update File button, 12-4, 12-7
Self-test, 4-94, 4-96, 15-17
Sending Update to Printer dialog, 12-6, 12-7
Sensor, 15-17
Sensor Location and Voltages, 10-3
Sensor Testing, 10-3
Serial interface, 15-17
Setting the Magnetic TOF, 11-26
Settings button, 4-91, 4-92
SETUP.EXE file, 12-2
Shift Data Left option, 7-67
Show Card Count option, 11-31
SIMM, 15-17
Simplex, 15-17
Smart Card, 15-17
Smart card encoder not installed., 4-10
smart chip, 7-4
SmartGuard, 15-17
SmartGuard™, 15-17
SmartShield™, 15-17
Softkey Buttons, 2-14, 2-16
Software, 15-17
Software Drivers, 2-12
Software Drivers, 2-9
Solid GREEN, 2-19
special precautions, 1-2, 7-2, 8-2
Split 1 Ribbon Panels, 7-34
Spooler, 15-17
Spooling, 15-18
SS (Start Sentinel), 15-18
SS distance (inches), 11-25
SS distance (millimeter), 11-25
SS, ES, FS, 7-69
Stacker, 15-18
Standard Self-test (YMC), 4-95
Start Sentinel, 11-26
Start Sentinel (SS), 7-69, 11-24, 11-25
Start Sentinel distance, 11-24
Stepper Motor, 15-18
String, 15-18
Supply Frequency, 2-12
Supply Voltage, 2-12
Surface mount, 15-18
surface roughness, 7-4
Switch Box, 15-18
System Requirements, 2-12
System Upgrade, 11-32
System Upgrade option, 12-4
T
TAC, 15-18
Tape adhesion Test, 7-6, 7-8
Tape Test, 7-49
Technical Specifications, 2-6, 2-7, 2-8, 2-9, 2-10, 2-11, 2-
12
Temp file, 15-18
Temperature Adjustment, 2-26
Test Core Pins (Lam), 4-95
Test Core Pins (Print), 4-95
test image, correctly positioned, 11-12
Test Print, 15-18
Tests Magnetic Encoding, 4-95
Thermal Transfer Film, 2-27
Thermal Transfer Film overlaminates, 2-28
Thermistor, 15-18
Thermocouple, 15-19
thicker cards, 7-4
thinner cards, 7-4
Through-hole, 15-19
Timeout, 15-19
to buffer/to hold, 7-38
TOF (Top of Form), 15-19
TOF Sensor, 4-36
total card area, 7-55
Track, 15-19
Track Information, 7-69
track number (1, 2 or 3), 7-69
Transfer Count, 4-20, 11-31
Transfer Dwell Time/Temperature, 7-49
Transfer EOF, 11-13, 11-14
Transfer film not installed., 4-6
Transfer Temperature, 11-20
Transfer Tension, 11-18
Transfer TOF, 11-11, 11-12
Transfer TOF/Transfer EOF, 11-8
transferred HDP Film, 7-6
troubleshoot the Printer, 13-1
Troubleshooting, 4-1, 15-19
TrueType (TT), 15-19
TrueType black text and TrueType barcodes, 7-50
TÜ V-EMC, 2-5
U
UL, 2-5
UltraCard, 15-19
UltraCard III, 15-19
UltraCard IIIs-Glossy PVC, 7-6, 7-16
UltraCard IIIs-Glossy PVC + H Panel ribbon
(2) , 7-5
UltraCard IIIs-Glossy PVC + non-H Panel ribbon, 7-5
UltraCard stock,
2-22
Unable to Feed Error, 4-2
unblocked Sensor, 4-37, 4-66
Undefined Area(s) - K Panel Resin tab, 7-53
Undefined Area(s) option, 7-53
Update, 15-19
Update file, 12-3
Upgrade Failed or Upgrade Firmware Now on, 12-6
Upgrade Required
LAM, 4-10
Upgrade Successful, 12-7
UPS (Un-interruptible Power Supply), 15-20
USB (Universal Serial Bus), 15-20