FARGO electronic HDP600-LC CR100 - Manual (Page 176)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-76
Resolving Check Lamination Material Error
Step Procedure
1 Review the following information.
• Symptom: An incorrect Overlaminate has been installed, or a Driver
setting is incorrect.
• Printer Error State: An incorrect Overlaminate has been installed, or a
Driver setting is incorrect.
• LCD Error Display: Check Lamination Material
• Driver Monitor Error Display: Check Lamination Material