FARGO electronic HDP600-LC CR100 - Manual (Page 247)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 5-51
Accessing the IP address of your Printer
The additional LCD menus for Ethernet-enabled Printers are provided to view the IP address
of the Printer. Follow these procedures to access the IP Address of your Printer model.
Accessing the HDP600 IP address
Step Procedure
1 Apply power to the Printer.
2 Ensure that the Printer is connected to your network.
3 Wait up to one (1) minute to allow the Printer to configure the IP address.
4 Select MENU on the LCD.
5 Select System Info on the LCD.
6 View the IP address displayed as a dotted quad number.
Example: 168.192.1.1