FARGO electronic HDP600-LC CR100 - Manual (Page 310)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 7-44
Using the Image Color tab (continued)
Step Procedure
4 Control the amount of heat the Printer uses when printing with the resin black
Panel by adjusting the Resin Heat slide.
• Move the slide to the left to cause less heat to be used in the printing
process, causing resin images to be lighter or less saturated.
OR
• Move the slide to the right to cause more heat to be used, causing resin
images to be darker or more saturated.
(Note: This control can be helpful for fine-tuning the sharpness of resin text
and bar codes.)