Setting up email event logging, Setting up email event logging -33 – FARGO electronic HDP600-LC CR100 User Manual
Page 229
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
5-33
Setting up Email Event logging
Follow this procedure to enable logging using email notification:
Step
Procedure (Specify email logging)
1 Select
the
System Log link.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select
the
Email radio button to choose email log notification.
4
Enter a valid e-mail address in the associated textbox.
5 Select
Submit.
6
Log in as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
Advertising