FARGO electronic HDP600-LC CR100 - Manual (Page 182)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-82
Resolving the Ribbon Wrinkle problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printed cards have off-colored lines or streaks on them.
• Printer Error State: None
• LCD Error Display: None
• Driver Monitor Error Display: None
2 Confirm that the Printer is using the most current Driver via:
http://www.fargo.com
3 Reduce the Dye-Sub Intensity setting within the Image Color tab of the
Printer Driver.