Resolving a transfer film not installed error, Resolving a transfer film not installed error -51 – FARGO electronic HDP600-LC CR100 User Manual
Page 151
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
4-51
Resolving a Transfer Film Not Installed Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1
Review the following information.
• Symptom: The Transfer Film is not installed.
• Printer Error State: The Transfer Film is not installed.
• LCD Error Display: Transfer Film Not Installed
• Driver Monitor Error Display: Transfer Film Not Installed
Advertising