Connecting power to the hdp600 printer (cont.) – FARGO electronic HDP600-LC CR100 User Manual
Page 72
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5)
3-26
Connecting power to the HDP600 Printer (cont.)
Display H – Displays the Printer power switch (ON/OFF).
Note No. 1: Turn on the Printer’s power by pressing on the power switch.
Note No. 2: Once the HDP600 has been powered on, the Printer will initialize both the Print
Ribbon and the HDP Film.
Advertising