FARGO electronic HDP600-LC CR100 - Manual (Page 139)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-39
Resolving a No Flipper Table Module Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Flipper Table Module Assembly is not functioning.
• Printer Error State: The Printer is unable to communicate with the
Flipper Module.
• LCD Error Display: No Flipper
• Driver Monitor Error Display: No Flipper