FARGO electronic HDP600-LC CR100 - Manual (Page 29)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 2-11
Technical Specifications (continued)
Term Description
Print Ribbon
Options HDP600 and HDP600-LC:
• Full color, YMC, 700 prints
• Full color with resin black, YMCK, 250 or 500 prints
• Full color with two resin black Panels, YMCKK, 400 prints
HDP600 CR100 and HDP600-LC CR100:
• Full color with two resin black Panels, YMCKK, 400 prints
• Full color with resin black and YMCKK, 400 prints; extra wide for
over-the-edge printing on CR-100 cards
All HDP Ribbons utilize Fargo's exclusive RibbonTraq™ system for
maximum print quality, performance, reliability and ease of use.
Note No. 1 (CR100): The YMCKH and YMCKK Ribbons are used
on the HDP600/HDP600-LC Printers and the HDP600
CR100/HDP600-LC CR100 Printers.
Note No. 2 (HDP600 print ribbons): Indicates the ribbon type and
the number of ribbon panels printed where Y=Yellow, M=Magenta,
C=Cyan, K=Resin Black, O=Overlay, F=Fluorescing.
Print Speed-
Batch Mode HDP600 and HDP600-LC (see note below):
• 35 seconds per card/112 cards per hour (YMC with transfer)
• 40 seconds per card/94 cards per hour (YMCK with transfer)
• 72 seconds per card/54 cards per hour (YMCKK with transfer)
• 40 seconds per card/90 cards per hour (YMCK/Lamination)
• 72 seconds per card/50 cards per hour (YMCKK/Lamination)
HDP600 CR100 and HDP600-LC CR100 (see note below):
• 85 seconds per card/45 cards per hour (YMCKK with Transfer)
• 93 seconds per card/45 cards per hour (YMCKK/Lamination)
Print speed indicates an approximate print speed and is measured
from the time a card feeds into the Printer to the time it ejects from
the Printer.
•
Print speeds do not include encoding time or the time needed
for the PC to process the image.
•
Process time is dependent on the size of the file, the CPU,
amount of RAM and the amount of available resources at the
time of the print.