FARGO electronic HDP600-LC CR100 - Manual (Page 6)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) vi
Specifying UDP Event logging _____________________________________________________ 5-34
Specifying TCP Event logging ______________________________________________________ 5-36
Using the Administration pages _______________________________________________________ 5-38
Using the System Information page __________________________________________________ 5-38
Changing the Root Password _______________________________________________________ 5-40
Upgrading the Print Server _________________________________________________________ 5-42
Using the Reboot pages______________________________________________________________ 5-44
Rebooting the Ethernet Server ______________________________________________________ 5-44
Resetting to Default Settings _______________________________________________________ 5-46
Using the Help page ________________________________________________________________ 5-47
Additional Procedures ________________________________________________________5-48
Reviewing LED and Dipswitch Tables __________________________________________________ 5-48
Reviewing the LED Table _________________________________________________________ 5-48
Reviewing the Dip Switches________________________________________________________ 5-49
Restoring the Factory Settings for Ethernet ______________________________________________ 5-50
Restoring the Default Settings ______________________________________________________ 5-50
Accessing the IP address of your Printer_________________________________________________ 5-51
Accessing the HDP600 IP address ___________________________________________________ 5-51
Upgrading the Main Firmware with the Fargo Diagnostics Utility _____________________________ 5-52
Ethernet Printer Troubleshooting Procedures _____________________________________5-54
Troubleshooting procedures ________________________________________________________ 5-54
Verifying the Printer Connection ____________________________________________________ 5-55
Verifying the Printer IP address _____________________________________________________ 5-55
Verifying that your PC can access the Printer using the ping command ______________________ 5-56
Printing a test page _______________________________________________________________ 5-57
Reviewing Frequently-asked Questions __________________________________________5-58
Glossary of Terms ____________________________________________________________5-64
Section 6: Card Lamination Module __________________________________________ 6-1
Reviewing the Card Lamination Module _________________________________________________ 6-1
Safety Messages (review carefully)______________________________________________________ 6-2
Opening the Card Lamination Module _________________________________________________ 6-3
Adjusting the Card Lamination Module __________________________________________________ 6-5
Adjusting the Card Flattener_________________________________________________________ 6-5
Section 7: Printer Adjustments _______________________________________________ 7-1
Safety Messages (review carefully)______________________________________________________ 7-2
Adjusting the Card Size_______________________________________________________________ 7-3
Adjusting the Card Thickness Adjustment Lever _________________________________________ 7-3
Printing on Alternate Card stocks _______________________________________________________ 7-4
Selecting the Right Cards and optimize the HDP Print Process ______________________________ 7-4
Selecting the Appropriate HDP Printer Driver settings ____________________________________ 7-5
Conducting the Tape adhesion Test ___________________________________________________ 7-6
Printer Driver Options ________________________________________________________________ 7-9
Installing Printer Driver Updates _____________________________________________________ 7-9
Setting Up the Printer Driver__________________________________________________________ 7-10
Setting up Windows 2000/Windows XP ______________________________________________ 7-10
Using the Card tab ___________________________________________________________7-11
Using the Card tab (HDP600/HDP600-LC) ______________________________________________ 7-11
Selecting the Card Size (HDP600 and HDP600-LC) _____________________________________ 7-12
Selecting the Custom Card Size _____________________________________________________ 7-14
Using the Card tab (HDP600 CR100/HDP600-LC CR100) __________________________________ 7-15
Selecting the Card Type (all HDP600 Printers) _________________________________________ 7-16