FARGO electronic HDP600-LC CR100 - Manual (Page 41)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 2-23
Printer Components: Card Input and Output Hoppers
Type Description
Card Input
Hopper The Card Input Hopper is where cards are initially loaded for printing.
Your Printer's hopper provides a large door that opens widely to make
card loading simple and closes securely to help protect your card stock.
HDP600 and HDP600-LC:
The Printer will hold a maximum of 200 cards (HDP600 has two Card
Input Hoppers; load 100 cards per Hopper) (based on a standard 30 mil
card thickness).
• Load 100 cards in each of the two (2) Card Input Hoppers in the
HDP600 Printers.
• Insert card weights as instructed in the HDP600 Training Video.
HDP600 CR100 and HDP600-LC CR100:
The Printer will hold 100 cards in the Input Hopper, based on a
standard 30 mil card thickness).
• Load 100 cards in the Card Input Hoppers in the HDP600 CR100
and HDP600-LC CR100 Printers.
• Insert card weights as instructed in the HDP600 Training Video.
(Note: The card weight is twice as thick as the regular card
weight.)