FARGO electronic HDP600-LC CR100 - Manual (Page 201)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 5-5
Reviewing the Telnet Command Table
The following table describes available Telnet commands. (Note: You can enter partial full-
word commands: the Printer will respond with additional help. For example, you can enter list
and the Printer will respond with all subcommands to the list command.)
Telnet Command Command Purpose Command Format
?
help
Display help for Telnet
commands. ?
reset
Reset the Ethernet interface for
the Printer/Encoder.
reset
ping
Send a ping command to another
IP address as a test of the
Ethernet interface. ping <IPADDR>