FARGO electronic HDP600-LC CR100 - Manual (Page 296)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 7-30
Adjusting for the Color Matching
Allows selection of the color matching option that best fits the requirements of the print job.
Step Procedure
1 Select None (a) if interested in print speed rather than print color, (b) if color
correcting the image for printing has already been done or (c) if using third
party color matching software.
OR
Select Algebraic to allow the Printer Driver to make very simple, fast, color
balance adjustments. (Note: This option gives a natural-looking image
without slowing down the processing speed of the Printer Driver. It also
allows further customization of the printed color of the cards through the
Image color tab.)
OR
Select Monitor to allow the Printer Driver to make color corrections similar to
the Algebraic option but through a more complex color matching algorithm.
(Note: This option shifts colors more radically so the colors in the image will
more closely match how they appear on screen.)