FARGO electronic HDP600-LC CR100 - Manual (Page 347)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 8-4
Cleaning the Printhead
Clean the Printhead every time the Print Ribbon is changed to maintain consistent print
quality, as instructed below. This procedure should also be performed approximately every
400 prints in order to maintain consistent print quality.
Caution: Never use a sharp tool or abrasive object of any kind to clean the
Printhead. It will damage the Printhead. Watches, rings, bracelets and other jewelry can
damage the Printhead if accidentally bumped against it. For best results, remove such items
before touching any internal components of Printer.
Step Procedure
1 Remove watches, rings, bracelets and other jewelry.
2 Open the Lamination Arm.
3 Use a Printhead Cleaning Pen from the Printer Cleaning Kit to firmly wipe
back and forth across the surface of the Printhead.
4 Close Lamination Arm once the Printhead is completely dry.