FARGO electronic HDP600-LC CR100 - Manual (Page 295)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 7-29
Adjusting the Film Type
Step Procedure
1 Allows you to select the film type option that is appropriate for the type of
HDP film currently loaded in the Printer.
• Select
the Clear option to automatically adjust the appropriate transfer
time and temperature to pre-determined defaults.
OR
• Select
the Holographic option to change appropriate internal Printer
settings needed to make the holographic film work. (Note: It will also
adjust the necessary transfer temperature and the dwell settings in the
Driver to provide the optimal holographic InTM performance.)
See the Printer’s LCD settings a new option for Holographic Film option.
This setting is located via this path: Menu > Print Test Image > Film:
When you get to the Film: setting, press the Select button to cycle
between Clear and Holographic film.