FARGO electronic HDP600-LC CR100 - Manual (Page 189)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-89
Resolving the Image Placement problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer. This procedure is used to adjust the position of the card in the Print driver and
does not change the internal settings of the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printing is cut off or is not centered on the card, or a white
border appears.
• Printer Error State: None
• LCD Error Display: None
• Driver Monitor Error Display: None