FARGO electronic HDP600-LC CR100 - Manual (Page 187)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-87
Resolving the Incomplete Resin Printing problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Black resin text and barcodes appear faded or too light.
See Display A below.
• Printer Error State: None
• LCD Error Display: None
• Driver Monitor Error Display: None
2 Increase the Resin Heat setting within the Image Color tab of the Printer
Driver. See Display B below.
3 Increase the Image Darkness. See the Adjusting the Image Darkness
procedure.
Display A – See Procedural Step 1