FARGO electronic HDP600-LC CR100 - Manual (Page 329)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 7-63
Encoding the Mode/Coercivity/Magnetic Track Selection (continued)
Use the ISO option for encoding capability for either high- or low-coercivity cards on tracks 1,
2 and 3 and is the industry's standard mode of magnetic encoding.
Step Procedure
3 Customize these options if the application requires it; even though, the
default ISO Magnetic Track Options should be correct for most applications.
(Note: All options must be changed separately for each of the three
individual tracks.)
a. Set these options back to the ISO standard settings once they have been
changed by selecting the Default button for each of the separate tracks.