FARGO electronic HDP600-LC CR100 - Manual (Page 156)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP600 High Definition Card Printer/Encoder User Guide (Rev. 2.5) 4-56
Resolving a Ribbon Break/Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: The Print Ribbon has become jammed or has broken in
the Printer
• Printer Error State: The Ribbon Supply Encoder Sensor has
unexpectedly stop receiving information from the Ribbon Encoder
• LCD Error Display: Ribbon Break/Jam
• Driver Monitor Error Display: Ribbon Break/Jam