Sony OXF-R3 - Manual (Page 131)

Chapter 5 Control Screens
5-17
Chapter 5 Control Screens
Assigning M/T INPUTS
The second 8 blocks entitled M/T, each with 2 clickable fields below, are
used for setting up the multitrack inputs.
INPUT – Upper field
The upper field of each block is used to select the input source. Click on
this to display a pop-up of the available sources as in Figure A. Click on
the desired source to select it. The sources available include multitrack
channels 1-48 and MADI signals 49-56.
RANGE
A contiguous range of inputs can be assigned simultaneously. To assign a
set of consecutive inputs to a number of consecutive channel inputs, M/T
Returns 1-48 to channel M/T Inputs 1-48 as an example:
• Click on the upper field below the M/T legend of Channel 1 for the
assignment pop-up shown in Figure A.
• Click on RANGE and its characters turn white and the background red.
• Click on the lowest number of the M/T Returns required, 1 in this
example, and it highlights red.
• Click on the highest number of the M/T Returns required, 48 in this
example, and M/T Returns 1-48 are assigned simultaneously to Channels
1-48.
M/T Returns already in use will be “stolen” in all cases when the RANGE
function is used.
To set a range of inputs to off:
• Click on RANGE and its characters turn white and the background red.
• Click on OFF for a pop-up displaying the channel numbers.
• Click on the first and last of the range required.
NAME – Lower field
The lower field is used to enter an electronic scribble name. Click on this
to display a pop-up as shown in Figure B. Either click on a name in the
list or click on NEW ENTRY and use the QWERTY keyboard to type in a
new name of up to 6 characters. Press ENTER when finished.
Click on ‘Track List’ at the top of the pop-up to load the name in the Track
List for Multitrack machines MT1 or MT2 in the Session Manager
TM .
These names are assigned using the central LCD. Click “All Tracks” to
load all the names for MT1 or MT2.
These options are available only if one or more outputs from MT1 or MT2 are
actually assigned to inputs on the M/T INPUTS GUI. It is possible to load Track
List names directly from the TRACK LISTS GUI. This is described in Chapter 7.
Note:
Note: