10-11 to set up super send groups from multitrack – Sony OXF-R3 User Manual
Page 55
Chapter 3
Getting Started
3-29
Chapter 3 Getting Started
3-10-11 To Set Up Super Send Groups from Multitrack
1
3
5,9
7
4
8
6
2
1
Press {ACCESS} for the first Channel to be routed
to a Super Send Group (SSG).
2
Select {M/T} and set suitable gain.
3
Make sure {CHANS} is selected on the Select To
Faders panel (fire-up default).
4
Make sure {SUPER SGs 1-8} is selected in the SSG
masters section.
5
At the Routing panel, de-select { L } and { R } .
6
At the same panel, select the SSGs required,
{1/9} and {2/10} in this case.
7
At the Select To Faders panel (SEL section), select
{SUPER SGs 1-8} , then adjust the Fader to 0dB in
the Central Faders panel.
8
Above the SSG 1 level knob select {MAIN} and its
{ACCESS} .
9
At the top of the Routing panel select { L } .
10
Repeat steps 7 and 8 for SSG 2 but select { R } at
the Routing panel.
11
Repeat steps 1 to 6 for further channels.