12-1 mainoutputbusset-up, 12 mixing to the main output bus, 12-1 main output bus set-up – Sony OXF-R3 User Manual
Page 84: Multi-format & stereo sub-groups 1-16
4-24
Chapter 4
Signal Paths
Chapter 4 Signal Paths
4-12 Mixing to the Main Output Bus
Master Section set-up functions
The 8 character dot display to the left of this panel can display the format
for the Main Output Bus and that of M/T Stems.
If the {SET MAIN WIDTH} button is lit, the format for the Main Output Bus
is displayed: STEREO, LCRS, 5.1 or 7.1. The current format for the Main
Output Bus is also displayed in the 8 character display above the central
Master fader.
If the {SET MT STEMS} button is lit, the format for the M/T Bus is
displayed: STEREO, LCRS, 5.1 or 7.1.
1
The {LOCK} push-button is normally lit, indicating that the set-up is
locked. Press to unlock indicated by the light going off. This button
will time out back to lock status 10 seconds after the last button push.
Note
A Config. Set-up option enables the {LOCK} button as a level of security, i.e. it
must be unlocked to allow bus assignment set-up.
4-12-1 Main Output Bus Set-up
MULTI-FORMAT & STEREO SUB-GROUPS 1-16
LOCK
L
C
MONO
R
CAL
DIM
CUT
M-F MON
BUS
MIX
R/C
L/C
L-S
SUB
R-S
1
EXT
1
EXT
3
EXT
2
EXT
4
EXT
5
EXT
6
4
3
5, 8
7
SET
MAIN
WIDTH
SET
MT
STEMS
2