Sony OXF-R3 - Manual (Page 234)

6-72
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-3 Central Section Panels
“A” & “B” Command Lines
{ A } {ENTER} & { B } {ENTER}
Create convenient temporary Cue points displayed in the CUES list; useful
for commands such as:
{LOCATE} {A} or {B}
Locates the system to timecode points set for Cue A or B.
{PLAY} {A} {B}
The system plays from Cue point A to Cue B and stops.
{CYCLE} {A} {B}
The system plays from Cue point A to Cue B then rewinds and repeats the
passage between A and B continuously until stopped by pressing either
{CANCEL} or the p transport key.
The A and B Cue points may be revised at any time.
{CANCEL} Key
Cancels the current command. It will also delete commands on the
Command Line prior to pressing {ENTER}.
{REPEAT} {ENTER}
This key sequence repeats the last-entered command. To access earlier
commands, press {REPEAT} the relevant number of times (up to a
maximum of 40). The stored command is displayed at each press. The
command will be executed when {ENTER} is pressed.