Sony OXF-R3 - Manual (Page 341)

Chapter 7 Session Management
7-81
Chapter 7 Session Management
7-7-10 Global Ready Enable
GLOBAL READY ENABLE GUI
Setting all or a large number of controls into an automation ‘ready enabled’ is possible using the GLOBAL
READY ENABLE GUI and also by keyboard entry.
General
This GUI allows the setting up of automation ‘ready
enable’ in Absolute or Trim modes for:
• The Complete Console
• Ranges of Channels
• Individual Channels
• All Controls for Selected Channels
• Sections of Controls for Selected Channels
• Key Individual Controls for Selected Channels
Using GLOBAL READY ENABLE GUI
Select the GUI using the GLOBAL softkey at the
bottom of the SNAPSHOTS, COPY & LINK GUI or
press the SCREENS softkey at the bottom right of the
central LCD. Then click on GLOBAL ENABLE or
use the 4 and $ keys on the Control Keyboard to
move the highlight to GLOBAL ENABLE and
{ENTER} on the Control Keyboard.
ABS or TRIM
When the GUI appears the ABS (absolute) button will
be lit red as the default mode. Click on TRIM for
Trim mode, which lights green and inter-cancels with
ABS.