6-6 merge/assemble screen – Sony OXF-R3 User Manual
Page 300
7-40
Chapter 7
Session Management
Chapter 7 Session Management
7-6 The Session Management™ Screen Pages
7-6-6 Merge/Assemble Screen
MERGE/ASSEMBLE screen
General
This time-line GUI displays the current Working Mix
as a blue bar along the bottom of the screen. Cue
points are displayed as vertical lines along this bar
with labels where possible.
Individual bars for any unsaved additional mix layers
will also be displayed as they are created or merged.
The most recent will be the uppermost. Any New
Dynamic Layers, that is those created by automating
controls on the console surface, will appear after
creation once the tape is put into rewind.
Timecode display
The Timecode display placed centrally at the top of the
screen displays the current time for the master
machine. The vertical line indicates the related
position along the time-line.
Mix Layer Status
The banner at the top right indicates the total number
of unsaved Mix Layers in the system memory. The
{UNDO}, {REDO}, {UNDO ALL} and {REDO ALL} keys
on the Control Keyboard can be used to undo and redo
layers.
The MERGE/ASSEMBLE GUI allows Mixes and Snapshots from any source to be merged with the current
Working Mix. Each bar in the GUI represents a Mix Layer and these may include additional Dynamic Layers.