Sony OXF-R3 - Manual (Page 356)

7-96
Chapter 7 Session Management
Chapter 7 Session Management
7-10 Backups
Layout overview
The BACKUPS GUI primarily consists of two rows of scrolling lists, each
with three columns and their own buttons. Either row can select the
Internal, Network or Removable drive via a pop-up. The Removable drive
must be mounted first before data can be accessed, which will occur
automatically when it is selected.
The following description applies to the operation of both drives.
Columns
The left column displays a list of all Projects on the relevant drive. This
allows all Projects to be viewed on both Drives simultaneously. Clicking
on the FACTORY legend gives access to further source options:
• FACTORY SNAPSHOTS
Basic set-up ‘Read Only’ Snapshots supplied with the system accessible
by User ‘ADMIN’ only in the Backups GUI.
• STUDIO SNAPSHOTS
‘Read Only’ Snapshots set-up relating to the Studio, accessible by User
‘ADMIN’ only in the Backups GUI.
• USERS
Allows access to Snapshots belonging to the current User. User
‘ADMIN’ has access to Snapshots belonging to all Users. For ADMIN,
the list of Users will be displayed in the left column and Snapshots will
be displayed in the middle column depending upon which User is
highlighted.
The middle column displays all Titles for a single Project when a single
Project is selected. If more than one Project is highlighted then the middle
column is blank.
The right column displays all Mixes and Snapshots for a Title when
a single Title is selected.
Selecting anything other than exactly one item from a list will clear
all lists to the right of the list in question.
Selection System
Use a Trackerball to select Projects, Titles, Mixes and Snapshots:
1 To select individual items click on them one at a time.
2 To select a range of items:
• Click on an item and keep the button pressed, then move the cursor
across the desired items to highlight them.
• Hold down {CTRL} on the QWERTY keyboard and click on the items
required one at a time.
• To select a range, click the first item then hold down {SHIFT} on the
QWERTY keyboard and click on the last.
3 To select all items in any column, click ALL at the top of the column.
4 To de-select a multiple or range just click on a single item.