Sony OXF-R3 - Manual (Page 367)

Chapter 7 Session Management
7-107
Chapter 7 Session Management
Type it in using the QWERTY Keyboard and then click on OK or
{ENTER}.
3
Click on MAP DRIVE for the local system to make the connection to
the remote system. Once completed, a pop-up will appear for
confirmation.
4
Select the Backups GUI using the appropriate softkey at the foot of the
GUI in order to copy files from the remote system.
SYSTEM Tab
DETECT POWER FAILURE
• Sets the OXF-R3 to react to Power Failure messages according to the
settings in the Uninterruptable Power Supply (UPS) management
software. The R3 can react in one of two ways according to priority
levels set within the software.
Lower priority functions can display a warning message on the central
GUI according to a script in the UPS software. Higher priority levels,
when power capacity is very low, for example, can instigate an
immediate Save of Mix Data. In this case, no warning will be given, but
a pop-up will confirn the save after the event. A new entry will appear in
the Mixes GUI, ‘UPS EMERGENCY SAVE’.