5 mixing overview – Sony OXF-R3 User Manual
Page 276
7-16
Chapter 7
Session Management
Chapter 7 Session Management
7-5 Mixing Overview
To add a new cut:
Adding a new cut in between previous cuts, with no
overlap, is straightforward. Implement as previously
described.
ON
TIME
PREVIOUS
CUT
PREVIOUS
CUT
NEW CUT
CUT
2
Press {GLOBAL DROP-IN} either before or after
rolling the tape to drop all ‘ready’ enabled cuts into
automation record, or press switches individually.
3
Press {GLOBAL DROP-OUT} after writing cuts and
then {READY CANCEL} followed by {PLAY}
{ENTER} to hear the result.
Note:
The bi-colour LEDs in the cut switches help with the
operation of these functions. The red light indicates manual
actions and amber those being performed by the computer.
Extra bright red/amber indicates simultaneous manual and
computer control.