Sony OXF-R3 - Manual (Page 74)

4-14
Chapter 4 Signal Paths
Chapter 4 Signal Paths
4-9 Broadcast Mode
Monitoring the multitrack
To listen to the stereo Multitrack Send Monitor Bus, select M/T MON at
the Ext. Source section of the Monitor panel in the centre section. This is a
dedicated internal monitor bus designed specifically for use when making
a parallel multitrack recording, alongside a stereo mix.
To set up a monitor balance, select {M/T MON} at the Select To Faders
panel and use the channels section faders.
The default monitor source is the Main Output bus. Selecting M/T MON
at the Ext. Source section allows direct comparison of the Multitrack
Monitor mix and the Main Output bus mix.
The {SEND} and {RET} (urn) Ready/Monitor switching on the control surface
functions in the normal manner in Broadcast Mode.
Note: