Sony OXF-R3 - Manual (Page 82)

4-22
Chapter 4 Signal Paths
Chapter 4 Signal Paths
4-12 Mixing to the Main Output Bus 4-12 Mixing to the Main Output Bus
Simplified signal path illustrating the components for mixing to the Multi-Channel Main Output
SOURCE CHANNELS
MAIN OUTPUT & MONITOR
MAIN BUS (# of Busses According to Central Setup: 7.1, 5.1, LCRS or STEREO)
Multi-Channel Main Output Bus in general
The Main Output Bus for the OXF-R3, which doubles as the M/T Monitor
Bus, can be used for Stereo or Surround mix-down according to the set-up
in the centre section. The set-up procedure is described later in this section.