Sony OXF-R3 - Manual (Page 140)

5-26
Chapter 5 Control Screens
Chapter 5 Control Screens
5-2 Channel Screens
GROUP O/P SAMPLE RATE CONVERTER – Third field right
This indicator turns red and reads “ON” when a digital I/O that has an
SRC turned on is selected. SRCs are controlled via the PREFERENCES
GUI, described later in this chapter.
INSERT SEND – Fourth field
The fourth field is used to select the M/T Group insert send destination or
adjust an assignment set using the Fast Insert function. Click on this to
display a pop-up as shown in Figure C. Click on the desired analogue send
destination or click on AES for the digital send destination. Further pages
of related pop-ups can be accessed by clicking on
“ or ”. Click on OFF
to disable an insert send. Click on RANGE to set a contiguous set of M/T
Group Insert Sends as described for the second field in this section.
INSERT RETURN – Fifth field
The fifth field is used to select the M/T Group insert returns. Click on this
to display a pop-up. Click on the desired analogue return source or range.
WORD LENGTH – Sixth field left
The sixth field (left) allows the M/T Group insert send and return word
length to be set, if the insert device is digital. Click on it to cycle through
the word lengths 16 bit, 20 bit and 24 bits. It will be set for both send and
return simultaneously.
M/T GROUP pop-up
Figure C - INSERT SEND