Sony OXF-R3 - Manual (Page 271)

Chapter 7 Session Management
7-11
Chapter 7 Session Management
2
Repeat as necessary for CUE 2, CUE 3, etc. To
give useful names to these cues later, move the
highlight to each Cue in turn and click on or press
{EDIT} on the Control Keyboard for a dialogue box.
Type in the name(s) required using the QWERTY
keyboard.
Mixes & Cues screen
To set cue points ‘on the fly’:
1
Roll the tape and press {CUE} on the Control
Keyboard in readiness for setting a cue point. At
the appropriate time, press {ENTER}. A pop-up
will appear, prompting the user to type in a suitable
name then either select OK on the screen or press
{ENTER} on the keyboard.
Alternatively, press {ENTER} again for the default
name of CUE 1, and a new cue point to be added
to the list displayed on the right half of the screen.
7-5-3 To Set Cue Points
Select the MIXES & CUES screen by pressing the MIXES softkey beneath the screen. The Start and End times
set for the current Title will be displayed either side of the central timecode display.