Sony OXF-R3 - Manual (Page 178)

6-16
Chapter 6 Technical Descriptions
Chapter 6 Technical Descriptions
6-2 Channels Section Panels
3 M/T SEND Push-Button
Allows pans to be switched to control the level sent to M/T bus during
recording.
4 INPUT GAIN Push-Button
Allows pans to be switched to control gain of Mic, M/T Return and Line
Input.
5 GRP TRIM Push-Button
Allows faders to be switched to control the gain of the M/T bus output to
the M/T channel.
6 M/T MON Push-Button
Allows pans to be switched to control the level sent to the independent
M/T Monitor Bus.
7 SHOW VALUE Push-Button
Allows the display of pan positions in degrees or gain/loss in dB on the
pans panel’s 6 character dot displays according to the function selected.
Press and hold {SHOW VALUE} and the current input device, e.g. ADC183,
will be displayed for each individual channel.
It is the ‘raw’ input device which will be displayed, not the ‘alias’ name, if one has
been set.
8 SENDS 1-24 Push-Buttons
Allow pans to be switched to control the levels sent to the effects and
foldback busses.
9 Joystick
The joystick surround sound panner is in parallel with the M/T Send Pan.
It allows 2D surround panning in multi-format mode and left/right pan in
stereo mode. Its knob is touch sensitive, indicated by the AUTO REC
push-button lighting when touched.
!º ABS Push-Button
Used to select ‘ready absolute’ status when automating joystick panning
movements (see Chapter 7).
!¡ TRIM Push-Button
Used to select ‘ready trim’ status when automating joystick panning
movements (see Chapter 7).
!™ AUTO REC Push-Button
Used to switch the joystick into automation record according to the ABS
or TRM status (see Chapter 7).
Note: