5 mixing overview, 5-1 getting started – Sony OXF-R3 User Manual
Page 269
Chapter 7
Session Management
7-9
Chapter 7 Session Management
OXF-R3 Logo screen
7-5 Mixing Overview
7-5-1 Getting Started
IMPORTANT:
Before mixing is started, make sure the TIMECODE
FORMAT and the SAMPLE RATE, for the current
programme material, are set correctly in the System
screen page.
Note
Instructions requiring an object in a screen to be
highlighted are referring to the orange highlight block.
The OXF-R3 logo screen is displayed after boot-up;
the softkey functions at the base of the SMS allow
selection of either SYSTEM (selecting pages for
machine set-ups etc.), PROJECTS (to go to the Artists/
Projects & Titles Screen) or SCREEN, which accesses
a pop-up menu box showing all available screen
selections.
Select PROJECTS by pressing the associated softkey.
The Session Manager Screens illustrated in this section are displayed on the LCD Control Screen in the centre
section of the OXF-R3 console. The Mixing Overview is intended as an abbreviated guide to enable an
experienced operator to start mixing as quickly as possible. In-depth information is provided later in this chapter.