10-7 to equalise monitor signal post multitrack – Sony OXF-R3 User Manual
Page 51
Chapter 3
Getting Started
3-25
Chapter 3 Getting Started
3-10-7 To Equalise Monitor Signal Post Multitrack
1
Press {ACCESS} for the desired Channel.
2
At the Input Channel & Inserts panel, select
‘MULTI’ in window number 5 using the { + } and
{ – } buttons either side. Select its large { IN }
button to insert the multitrack into the signal path.
3
At the same panel, select ‘EQ’ in a window after
window 5, window 8 for example, and select the
large { IN } button to insert the equaliser into the
signal path after the multitrack.
4
On the upper section of the same panel, select the
individual { IN } buttons for the bands required and
adjust as necessary.
5
Select the EQ softkey for the screen above the
equaliser panel to view the parameters and
response curve graph.
1
2 4
5
3